PLCs, Power Supplies & Others

Technical Specifications and Hardware Overview

The Siemens AET89120-E3087-H operates as an industrial control module for distributed automation systems. This module measures 180 mm in height, 75 mm in width, and 130 mm in depth for standard DIN rail mounting. It weighs approximately 1.1 kilograms, which provides stable mechanical integration within control cabinets. The unit draws 1.2 A from a 24 V DC supply, consuming roughly 28.8 W during full operational load. It features one PROFIBUS DP interface for high-speed fieldbus communication. The module also includes two RS-485 serial ports for device connectivity.

It provides 16 digital inputs with 24 V DC nominal voltage for sensor signal acquisition. The unit offers 16 digital outputs with 0.5 A per channel for actuator control. It contains 512 KB of flash memory for firmware and user program storage. The module includes 128 KB of RAM for real-time data processing operations. It supports a maximum transmission rate of 12 Mbps on the PROFIBUS network. The operating temperature range spans -20°C to 60°C for harsh industrial settings. Storage temperatures extend from -40°C to 85°C without causing damage. Humidity tolerance covers 5% to 95% non-condensing conditions for reliable performance.

Communication and I/O Capabilities

This control module manages data exchange at up to 12 Mbps on the PROFIBUS network. It supports both master and slave operational modes for flexible system integration. The Siemens AET89120-E3087-H processes 16 digital inputs with response times under 3 ms. It drives loads directly through 16 digital outputs with built-in overcurrent protection. The unit enables parameterization of each I/O channel individually via software configuration. It uses optical isolation between field signals and internal logic for noise immunity. The module provides diagnostic LEDs for power, communication, and I/O status monitoring. It stores configuration settings in onboard EEPROM for reliable power-loss retention. The unit supports address assignment through hardware DIP switches or software tools.

Installation and Reliability Metrics

The AET89120-E3087-H mounts securely onto a standard 35 mm DIN rail. It requires 40 mm clearance above and below for sufficient ventilation. The module delivers a mean time between failures of 350,000 hours. It carries CE, UL, and ATEX Zone 2 certifications for versatile deployment. The unit passes vibration testing at 5 to 500 Hz with 0.5 g amplitude. It withstands shock loads up to 10 g for 11 ms duration. The module contains one main PCB with approximately 150 components. This design enables straightforward maintenance and component-level servicing.

Details