PLCs, Power Supplies & Others

The 6AV1908-0BC00 external video interface unit connects SIMATIC operator panels to a remote monitor. Siemens builds this unit for control rooms that need larger display visibility. It converts panel video output into a signal that drives a standard monitor over a distance.

Video Output and Interface Details

The unit delivers one VGA video output at 640 × 480 resolution with a 60 Hz refresh rate. A 15-pin D-sub connector handles the monitor link with secure screw retention. The input side accepts the panel signal through a dedicated ribbon connector. Additionally, the unit supports cable runs up to 30 meters without signal amplification.

Physical Dimensions and Power Details

The unit measures 150 mm in width, 110 mm in depth, and 45 mm in height. It weighs approximately 0.6 kg, and it mounts on a flat panel or standard 35 mm DIN rail. A 24 VDC input powers the unit at a maximum draw of 0.4 A. The metal housing shields video signals from electromagnetic interference in crowded cabinets.

Installation and Configuration Notes

Technicians mount the 6AV1908-0BC00 near the panel and connect the ribbon cable to the video port. The VGA cable then runs to the remote monitor in the control room. Engineers adjust the display settings through the panel configuration menu. Therefore, operators gain a larger view of process screens without replacing the original panel.

Why This Unit Fits Control Room Upgrades

Integrators choose the 6AV1908-0BC00 for its 30-meter cable reach and shielded metal housing. The unit lets existing panels drive large monitors in control rooms. The compact footprint fits crowded cabinet interiors without layout changes. This interface unit serves power plants, water treatment facilities, and manufacturing control rooms.

Details