The GE IS200X050H1A IS200X050H1ABR1 belongs to the Mark VI series. General Electric designed this board as an I/O terminal unit. This component connects field devices to the control system. It also provides signal conditioning for various sensor types.
Technical Specifications
The table below lists all key parameters for the GE IS200X050H1A IS200X050H1ABR1.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Full Model | IS200X050H1A / IS200X050H1ABR1 |
| Product Type | Input/Output Terminal Board |
| Series | Mark VI |
| Width | 10.0 inches (25.4 cm) |
| Height | 7.0 inches (17.8 cm) |
| Weight | 1.0 lb (0.45 kg) |
| Component Count | Over 125 surface-mount devices |
| Main Interface | One 64-pin male DIN connector |
| Terminal Positions | 50 screw-type connections |
| Digital Inputs | 24 optically isolated channels |
| Digital Outputs | 16 open-collector channels |
| Analog Inputs | 6 differential 12-bit channels |
| Input Voltage Range | 24 V DC for digital inputs |
| Output Current | 500 mA per digital output |
| Energy Storage | Ceramic and tantalum capacitors |
| Status Indicators | Two LEDs (power and active) |
I/O Terminal Features
The GE IS200X050H1A IS200X050H1ABR1 uses a rugged four-layer PCB. Over 125 resistors, capacitors, and optocouplers condition field signals. A single 64-pin DIN connector links this board to the backplane. Consequently, field data reaches the main processor reliably. Two onboard LEDs show power and active status. Moreover, tantalum capacitors provide stable energy for analog circuits.
Input and Output Capabilities
You get 50 screw-type terminal positions on this I/O terminal board. These terminals accept wiring from field sensors and actuators. The GE IS200X050H1A IS200X050H1ABR1 provides 24 optically isolated digital inputs. Sixteen open-collector digital outputs drive external loads at 500 mA each. Six differential analog inputs offer 12-bit resolution. Therefore, this board handles mixed I/O requirements for turbine control.
Power and Energy Storage
You must install this board inside a protected Mark VI cabinet. The backplane supplies 5 VDC and 24 VDC to the GE IS200X050H1A IS200X050H1ABR1. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable analog references. As a result, the board delivers accurate signal conditioning consistently.
Mechanical Layout
This I/O terminal board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this terminal board by its edges. This precaution prevents electrostatic discharge damage.
Installation Context
This board works alongside other Mark VI processor and I/O cards. Its screw terminals allow easy field wiring without special tools. The robust design handles continuous industrial operation. Choose the GE IS200X050H1A IS200X050H1ABR1 for your I/O terminal needs.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.