Key Technical Specifications
This GE IS200VPROH1B IS200VPROH1BGG board operates from a 24V DC power supply. It provides 16 safety I/O channels for turbine emergency trips. The unit measures 24 cm in length, 18 cm in width, and 5 cm in height. Its total weight reaches 0.8 kg without any packaging materials.
The GE IS200VPROH1B IS200VPROH1BGG includes 8 digital inputs and 8 safety relay outputs. Additionally, it features one backplane connector for host communication. A single 6-pin terminal block connects the DC power input. The board contains 1 FPGA, 8 optocouplers, 8 safety relays, 8 status LEDs, 4 snubber circuits, 24 resistors, and 18 capacitors.
| Parameter | Value |
|---|---|
| Power Supply | 24V DC ±10%, 300mA |
| Digital Inputs | 8 channels (24V, sinking) |
| Safety Outputs | 8 channels (5A at 240V AC) |
| Dimensions (L x W x H) | 24 cm x 18 cm x 5 cm |
| Weight | 0.8 kg |
| Input Response Time | < 2 ms |
| Output Response Time | < 10 ms |
| Relay Type | Force-guided safety relays |
| Backplane Interface | 50-pin DIN |
| Power Connector | 6-pin terminal block |
| FPGA | 1 unit |
| Optocouplers | 8 units (input isolation) |
| Safety Relays | 8 units (force-guided) |
| Status LEDs | 8 units (red when tripped) |
| Snubber Circuits | 4 RC networks |
| Resistors | 24 units |
| Capacitors | 18 units |
| Energy Storage | 220 µF at 35V |
GE IS200VPROH1B IS200VPROH1BGG stores energy using two electrolytic capacitors. Together, they provide 220 µF at 35V rating for relay hold-up. This energy storage maintains trip outputs during 25 millisecond power interruptions. Therefore, safety trips remain active through brief voltage dips.
Design and Integration
Both the GE IS200VPROH1B and IS200VPROH1BGG versions share identical safety I/O circuitry. These boards use six-layer PCB construction with force-guided relay contacts for safety compliance. Consequently, the GE IS200VPROH1B IS200VPROH1BGG operates reliably from -15°C to +60°C ambient temperature.
For installation, you need M3 screws for the four mounting holes. The board draws 250 mA typical current from the 24V DC supply. Each safety relay includes positive-guided contacts for diagnostic coverage. We recommend using separate cable trays for input and output wiring.
Practical Application
This turbine emergency trip I/O board monitors critical safety inputs and initiates shutdown. It reads overspeed, vibration, and flame detector signals continuously. The GE IS200VPROH1B IS200VPROH1BGG then opens safety relays to de-energize trip solenoids. Therefore, it provides reliable emergency protection for GE turbine control systems.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.