This terminal board provides a dedicated field wiring interface for turbine control signals. The GE IS200TTURH1C IS200TTURH1CCC connects directly to compatible VME I/O modules in the Mark VIe system. Each board features sixty-four individual screw-type terminal positions for flexible field terminations. Consequently, technicians can organize sensor and actuator wiring efficiently within a single panel location.
Technical Specifications of the Turbine Terminal Board
The GE IS200TTURH1C IS200TTURH1CCC measures 320 mm in width and 305 mm in height. Its depth reaches 35 mm for standard panel mounting applications. The board weighs approximately 1.2 kg including all terminal blocks and mounting hardware. Three separate 64-pin ribbon cable connectors interface with up to three host I/O modules. This design stores no energy whatsoever. Therefore, the board contains no capacitors, batteries, or any other storage elements.
| Parameter | Specification |
|---|---|
| Full Model | GE IS200TTURH1C IS200TTURH1CCC |
| Category | Turbine Terminal Board |
| Dimensions (W x H x D) | 320 mm x 305 mm x 35 mm |
| Weight | Approximately 1.2 kg |
| Terminal Positions | 64 screw-type blocks |
| Host Interfaces | 3 x 64-pin ribbon cable connectors |
| Wire Gauge | 14 to 24 AWG |
| Energy Storage | None |
| Mounting Type | Panel mount with six screws |
| Compatible With | Mark VIe analog, digital, and relay cards |
Functional Features and Signal Routing
The GE IS200TTURH1C IS200TTURH1CCC routes each I/O channel to an individually labeled terminal position. You can wire analog inputs, digital outputs, and relay contacts on the same board. Each terminal block includes a clear identification number matching the host module channel mapping. The board also provides built-in passive filtering for analog signal paths. These filters reduce electrical noise from long field cable runs.
Installation and System Integration
You must mount this terminal board inside a standard turbine control cabinet. The GE IS200TTURH1C IS200TTURH1CCC requires six screws for secure panel attachment. Three short 64-pin ribbon cables then connect the board to separate host I/O cards. Always use the original GE cables for reliable signal integrity. This design eliminates any need for backplane slots or additional chassis.
Maintenance and Wiring Benefits
Because the GE IS200TTURH1C IS200TTURH1CCC stores no energy, it requires no discharge time before handling. Technicians can safely replace field wiring without powering down the entire turbine system. Each terminal block accepts solid or stranded copper wire from 14 to 24 AWG. Consequently, the board suits the demanding environmental conditions inside turbine control panels.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.