I/O modules

Key Technical Specifications

This GE IS200TSVOH1A IS200TSVOH1AAA board uses a 24V DC power input. It delivers 2A output current for servo motor control systems. The unit measures 18 cm in length, 14 cm in width, and 4 cm in height. Its total weight equals 0.65 kg without any packaging.

The GE IS200TSVOH1A IS200TSVOH1AAA includes three optical isolation interfaces. Additionally, it features one 15-pin D-sub connector for encoder signals. A two-pin terminal block provides the main power connection. The board contains 6 optocouplers, 4 transistors, and 10 resistors.

GE IS200TSVOH1A IS200TSVOH1AAA stores energy using one aluminum electrolytic capacitor. This capacitor provides 220 µF at 50V rating for voltage smoothing. Consequently, the board maintains stable output during short load transients.

Design and Integration

Both the GE IS200TSVOH1A and GE IS200TSVOH1AAA versions share identical circuitry. These boards use four-layer PCB construction for better noise immunity. Therefore, the GE IS200TSVOH1A IS200TSVOH1AAA operates reliably in industrial environments from -10°C to +60°C.

For mounting, you need M3 screws for the six pre-drilled holes. The board draws 80 mA typical current from the 24V supply. We recommend using a 1A slow-blow fuse for input protection.

Practical Application

This termination board connects servo drives to external encoders and sensors. It isolates control signals to prevent electrical noise interference. The GE IS200TSVOH1A IS200TSVOH1AAA also routes limit switch inputs to the main controller. Therefore, it simplifies wiring between the drive and field devices.

Details