The GE IS200TSVCH1A IS200TSVCH1AEC belongs to the Mark VI series. General Electric designed this board as a servo terminal unit. This component connects servo valves to the control system. It also conditions feedback signals from position sensors.
Technical Specifications
The table below lists all key parameters for the GE IS200TSVCH1A IS200TSVCH1AEC.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Full Model | IS200TSVCH1A / IS200TSVCH1AEC |
| Product Type | Servo Terminal Board |
| Series | Mark VI |
| Width | 10.0 inches (25.4 cm) |
| Height | 7.0 inches (17.8 cm) |
| Weight | 1.0 lb (0.45 kg) |
| Component Count | Over 135 surface-mount devices |
| Main Interface | One 64-pin male DIN connector |
| Terminal Blocks | 32 screw-type positions |
| Servo Outputs | 4 analog channels (±10 V DC) |
| LVDT Inputs | 4 differential channels |
| Excitation Output | 3 kHz, 5 V RMS for LVDTs |
| Output Current | 20 mA per servo channel |
| Energy Storage | Ceramic and tantalum capacitors |
| Status Indicators | Two LEDs (power and active) |
Servo Terminal Features
The GE IS200TSVCH1A IS200TSVCH1AEC uses a rugged four-layer PCB. Over 135 resistors, capacitors, and op-amps process servo signals. A single 64-pin DIN connector links this board to the backplane. Consequently, servo commands reach valves without distortion. Two onboard LEDs show power and active status. Moreover, tantalum capacitors provide stable energy for analog circuits.
Output and Input Capabilities
You get 32 screw-type terminal positions on this servo board. These terminals accept wiring from servo valves and sensors. The GE IS200TSVCH1A IS200TSVCH1AEC provides four analog servo output channels at ±10 V DC. Each output delivers 20 mA for driving valve coils. Four differential LVDT input channels read position feedback. A built-in 3 kHz, 5 V RMS excitation source powers LVDT sensors. Therefore, this board handles complete servo valve control loops.
Power and Energy Storage
You must install this board inside a protected Mark VI cabinet. The backplane supplies 5 VDC and ±15 VDC to the GE IS200TSVCH1A IS200TSVCH1AEC. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable analog references. As a result, the board delivers precise servo control consistently.
Mechanical Layout
This servo terminal board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this terminal board by its edges. This precaution prevents electrostatic discharge damage.
Installation Context
This board works alongside other Mark VI processor and I/O cards. Its screw terminals allow easy field wiring for servo systems. The robust design handles continuous industrial motion control. Choose the GE IS200TSVCH1A IS200TSVCH1AEC for your servo terminal needs.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.