The GE IS200TRPAS1A IS200TRPAS1AFD terminates field wiring for excitation systems. This board connects field devices to the main control rack. It fits directly into GE EX2100 and Mark VIe Series systems. You will use this unit for organized and reliable signal distribution.
Technical Specifications Overview
This terminal board features 32 screw-type termination points for field wires. Each point accepts wires from 0.5 mm² to 2.5 mm² (20–14 AWG). The GE IS200TRPAS1A IS200TRPAS1AFD provides a dedicated ground bar for shielding. A built-in surge suppression circuit protects connected electronics from voltage spikes. Consequently, you achieve clean signal transmission without interference.
| Parameter | Specification |
|---|---|
| Model | GE IS200TRPAS1A IS200TRPAS1AFD |
| Termination Points | 32 (screw-type) |
| Wire Gauge | 0.5 – 2.5 mm² (20–14 AWG) |
| Ground Terminals | 8 (common bar) |
| Surge Protection | 1500 W peak |
| Isolation Voltage | 2500 V AC (field to backplane) |
| Contact Material | Brass with nickel plating |
| Dimensions (H x W x D) | 230 x 160 x 35 mm |
| Weight | 0.72 kg |
| Operating Temperature | -20°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Humidity Tolerance | 5–95% non-condensing |
Internal Components and Energy Storage
The GE IS200TRPAS1A IS200TRPAS1AFD contains one main PCBA with 68 discrete components. Key parts include 32 terminal blocks and 8 MOV surge suppressors. The board also holds two small capacitors storing 100 µF of energy. This storage filters high-frequency noise on incoming power lines. Moreover, a copper ground plane reduces electromagnetic interference across all channels. Each terminal has a numbered label for easy identification.
Physical Interfaces and Connectors
You will find one rear-facing 40-pin connector on this board. This connector links to the IS200 series analog input or feedback boards. A separate 8-pin header provides external ground connections. All 32 terminals sit on the front edge for easy access. Four green LEDs indicate power status and ground integrity. Six mounting holes secure the GE IS200TRPAS1A IS200TRPAS1AFD firmly to its backplate.
Installation and Operational Reliability
Install this terminal board inside a clean and dry control cabinet. Leave 40 mm of space above for wire bending radius. The board requires no configuration or software setup for operation. Therefore, you save installation time on every project. This unit supports continuous duty in harsh industrial environments.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.