This terminal board provides a convenient field wiring interface for relay output modules. The GE IS200TRLYH2F IS200TRLYH2FAA connects directly to compatible VME relay boards in the Mark VIe system. Each board features sixteen screw-type terminal blocks for secure field wire termination. Consequently, technicians can install or remove field cables without special tools.
Technical Specifications of the Terminal Board
The GE IS200TRLYH2F IS200TRLYH2FAA measures 266.7 mm in width and 203.2 mm in height. Its depth reaches 25.4 mm for easy panel mounting. The board weighs approximately 0.9 kg including all terminal blocks. A single 64-pin ribbon cable connector interfaces with the host relay board. This design stores no energy whatsoever. Therefore, the board contains no capacitors, batteries, or other storage elements.
| Parameter | Specification |
|---|---|
| Full Model | GE IS200TRLYH2F IS200TRLYH2FAA |
| Category | Relay Output Terminal Board |
| Dimensions (W x H x D) | 266.7 mm x 203.2 mm x 25.4 mm |
| Weight | Approximately 0.9 kg |
| Terminal Blocks | 16 screw-type positions |
| Host Interface | 64-pin ribbon cable connector |
| Wire Gauge | 12 to 22 AWG |
| Energy Storage | None |
| Mounting Type | Panel mount with four screws |
| Compatible With | IS200DRLYH1A series boards |
Functional Features and Connections
The GE IS200TRLYH2F IS200TRLYH2FAA routes each relay contact to an individual terminal position. You can wire normally open and normally closed contacts separately. Each terminal block includes a labeled identification number for easy reference. The board also features built-in surge suppression diodes across each relay output. These diodes protect the relay contacts from inductive load spikes.
Installation and Compatibility
You must mount this terminal board inside a standard control cabinet. The GE IS200TRLYH2F IS200TRLYH2FAA requires four screws for secure panel attachment. A short 64-pin ribbon cable then connects the board to the host relay card. Always use the original GE cable for reliable signal transfer. This design eliminates any need for backplane slots or chassis mounting.
Maintenance and Safety Benefits
Because the GE IS200TRLYH2F IS200TRLYH2FAA stores no energy, it requires no discharge time before handling. Technicians can safely replace field wiring without powering down the entire system. Each terminal block accepts solid or stranded copper wire from 12 to 22 AWG. Consequently, the board suits most industrial control panel installations.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.