The IS200TBAIH1B IS200TBAIH1BAA serves as an analog terminal board for GE control systems. This board provides field wiring connections for analog input and output signals. Its rectangular frame measures 210 millimeters in width. The board height reaches 150 millimeters exactly. Depth stays at 25 millimeters. You will find this unit weighs approximately 0.56 kilograms. Therefore, installation requires four mounting screws on a flat panel. Three removable terminal blocks handle all field wiring connections.
Physical Layout and Connectors
Each terminal block accepts wires up to 16 AWG gauge. A green LED indicates power present on the board. Two 37-pin D-sub connectors link to the host analog I/O module. Four plated mounting holes align with standard GE panel patterns. The board includes a ground bus bar for system earthing.
Technical Specifications
| Parameter | Value |
|---|---|
| Board Width | 210 mm |
| Board Height | 150 mm |
| Board Depth | 25 mm |
| Unit Weight | 0.56 kg |
| Terminal Blocks | 3 x removable (16 AWG) |
| Connection Points | 32 (mixed analog) |
| D-sub Connectors | 2 x 37-pin female |
| Component Total | 88 discrete parts |
| Current Rating | 1A per terminal |
| Voltage Rating | 60V DC / 30V AC |
| Internal Energy Storage | None (0 µF) |
| Contact Material | Gold-plated copper |
| Operating Temperature | -20°C to +70°C |
Internal Design and Construction
The IS200TBAIH1B IS200TBAIH1BAA contains exactly 88 discrete components. A simple PCB routes each terminal to its corresponding D-sub pin. The board uses no capacitors or energy storage devices. Gold-plated D-sub connectors ensure reliable signal transmission. The terminal blocks use rising cage clamp mechanisms for secure wire retention. Shielded traces reduce noise on analog signal paths.
Operational Performance
This analog terminal board connects field devices to GE analog I/O modules. It transfers 0-10V and 4-20mA signals between field and control system. Moreover, the unit supports both input and output analog channels. You can terminate up to 32 analog field wires at one location. The cage clamps resist vibration better than screw terminals. Each clamp releases quickly for wire changes or rework. Consequently, you achieve accurate analog signal termination for GE systems. GE designed this board for Mark VI and Mark VIe platforms.
In summary, the IS200TBAIH1B IS200TBAIH1BAA delivers reliable analog terminal connectivity. Use this board for analog I/O marshalling in GE control systems. It simplifies field wiring for analog process signals. Order this terminal board analog for your GE Mark VI system.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.