I/O modules

The GE IS200SPIDG1A IS200SPIDG1ABA belongs to the Mark VI series. General Electric designed this board as a Profibus DP master. This component manages communication with field devices on Profibus networks. It also handles data exchange between the turbine controller and remote I/O.

Technical Specifications

The table below lists all key parameters for the GE IS200SPIDG1A IS200SPIDG1ABA.

Profibus Master Features

The GE IS200SPIDG1A IS200SPIDG1ABA uses a rugged four-layer PCB. Over 140 resistors, capacitors, and line drivers process fieldbus signals. A single 64-pin DIN connector links this board to the backplane. Consequently, Profibus data reaches the main processor efficiently. Three onboard LEDs show power, communication activity, and fault status. Moreover, tantalum capacitors provide stable energy for communication chips.

Network and Protocol Capabilities

You get one DB-9 female Profibus port on this DPM board. This port connects to standard Profibus DP cabling. The GE IS200SPIDG1A IS200SPIDG1ABA supports DP-V0 and DP-V1 protocol versions. Baud rates range from 9.6 kbps to 12 Mbps for flexible network design. This master handles up to 125 slave devices per network segment. Cycle time stays under 2 milliseconds for 32 active slaves. Therefore, this board provides high-speed fieldbus control for turbine systems.

Power and Energy Storage

You must install this board inside a protected Mark VI cabinet. The backplane supplies 5 VDC to the GE IS200SPIDG1A IS200SPIDG1ABA. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for short hold-up during transients. As a result, the board delivers reliable Profibus communication consistently.

Mechanical Layout

This Profibus DPM board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the backplane connector. Always handle this board by its edges. This precaution prevents electrostatic discharge damage.

Installation Context

This board works alongside other Mark VI processor and I/O cards. Its compact size allows easy placement near network cabling. The robust design handles continuous industrial communication. Choose the GE IS200SPIDG1A IS200SPIDG1ABA for your Profibus master needs.

Details