The IS200RAPAG1B IS200RAPAG1BBA provides reliable DC power for industrial racks. This board converts AC input into stable 24V output. Its rectangular frame measures 210 millimeters in width. The board height reaches 150 millimeters exactly. Depth stays at 25 millimeters. You will find this unit weighs approximately 0.95 kilograms. Therefore, installation requires four standard mounting screws. Three terminal blocks handle input and output wiring connections.
Physical Layout and Connectors
Each terminal block accepts wires up to 12 AWG gauge. A green LED indicates power present on the board. Four mounting holes align with standard GE rack patterns. You can mount this board vertically or horizontally. The metal shield covers the power conversion section for safety.
Technical Specifications
| Parameter | Value |
|---|---|
| Board Width | 210 mm |
| Board Height | 150 mm |
| Board Depth | 25 mm |
| Unit Weight | 0.95 kg |
| Input Voltage | 85–264V AC |
| Output Voltage | 24V DC |
| Output Current | 10A (max) |
| Power Rating | 280W |
| Terminal Blocks | 3 x 12 AWG max |
| Component Total | 168 discrete parts |
| Internal Energy Storage | 4700 µF capacitor bank |
| Efficiency | 86% typical |
| Operating Temperature | -20°C to +60°C |
Internal Design and Energy Storage
The IS200RAPAG1B IS200RAPAG1BBA contains exactly 168 discrete components. A 4700 microfarad capacitor bank filters the incoming AC power. This bank provides 20 milliseconds of hold-up after power loss. The board uses a flyback converter topology for high efficiency. Built-in overcurrent protection shuts down the output during faults. A dedicated controller manages the switching cycle timing.
Operational Performance
This rack power supply board accepts universal AC input from 85 to 264 volts. It delivers regulated 24V DC at up to 10 amperes continuously. Moreover, the unit includes overvoltage protection on the output. You can parallel multiple boards for higher total current output. The board operates at 86% efficiency, minimizing waste heat. Three terminal blocks provide separate input and output connections. Consequently, you achieve reliable power distribution for rack systems. GE designed this board for industrial control cabinets. Its convection cooling requires no external fan for operation.
In summary, the IS200RAPAG1B IS200RAPAG1BBA delivers clean and stable DC power. Use this board for GE rack systems and industrial controls. It ensures your controllers receive noise-free operating voltage. Order this rack power supply board for your GE automation panel.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.