Key Technical Specifications
This GE IS200MVRPH1A IS200MVRPH1ABB board accepts 240V AC single-phase input power. It distributes 30A total current across multiple protected output circuits. The unit measures 26 cm in length, 18 cm in width, and 5.5 cm in height. Its total weight reaches 1.1 kg without any packaging materials.
The GE IS200MVRPH1A IS200MVRPH1ABB includes twelve fused output channels for field devices. Additionally, it features one main circuit breaker for input overcurrent protection. A single 6-pin terminal block connects the incoming AC supply. The board contains 12 fuse holders, 1 breaker, 6 status LEDs, and 24 terminal positions.
| Parameter | Value |
|---|---|
| Input Voltage | 240V AC ±10%, 50/60Hz |
| Total Current Rating | 30A continuous |
| Output Channels | 12 individually fused |
| Dimensions (L x W x H) | 26 cm x 18 cm x 5.5 cm |
| Weight | 1.1 kg |
| Fuse Ratings | 2A, 5A, or 10A (field selectable) |
| Main Circuit Breaker | 30A, magnetic-thermal |
| Input Terminal Block | 6-pin, 45A rated |
| Output Terminals | 24 positions (2 per channel) |
| Status Indicators | 12 LEDs (one per channel) |
| Fuse Holders | 12 units (5x20mm) |
| Bus Bars | 3 units (copper, tin-plated) |
| Resistors | 12 units (LED current limiting) |
| Energy Storage | None (no capacitors on AC lines) |
GE IS200MVRPH1A IS200MVRPH1ABB does not include onboard energy storage. Instead, it relies on external power supplies for filtering. This design minimizes heat generation inside the distribution panel. Therefore, the board maintains a cool operating temperature even at full load.
Design and Integration
Both the GE IS200MVRPH1A and GE IS200MVRPH1ABB versions share identical power routing. These boards use two-layer PCB construction with heavy 4 oz copper for bus bars. Consequently, the GE IS200MVRPH1A IS200MVRPH1ABB operates reliably from -10°C to +60°C ambient temperature.
For installation, you need M4 screws for the four mounting holes. The board draws 20 mA typical current for LED indicators only. Each output channel provides individual fuse protection against short circuits. We recommend using 14 AWG wire for the main input connection.
Practical Application
This power distribution board supplies control power to multiple field devices from one source. It feeds sensors, relays, and small actuators with protected branch circuits. The GE IS200MVRPH1A IS200MVRPH1ABB also provides visual fault indication via blown-fuse LEDs. Therefore, it simplifies panel wiring and improves maintenance efficiency in turbine control cabinets.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.