I/O modules

This GE IS200JGPAG1A IS200JGPAG1APR1 Ground and Power Terminal Board provides centralized grounding and power distribution points. The board connects multiple chassis grounds to a single star grounding location. You will find this component in many GE Mark VI turbine control cabinets. The IS200JGPAG1APR1 variant includes the standard factory configuration without conformal coating.

Technical Specifications

Grounding and Power Distribution Features

The GE IS200JGPAG1A IS200JGPAG1APR1 Ground and Power Terminal Board creates a single low-impedance ground reference point. Each ground stud connects to the main chassis bonding point directly. The board also distributes DC power to multiple cabinet locations simultaneously. Furthermore, it includes clearly labeled positions for every connection point. Consequently, you eliminate ground loops and improve system noise immunity.

Installation and Connection Steps

Mount this GE IS200JGPAG1A IS200JGPAG1APR1 Ground and Power Terminal Board in the lower section of any Mark VI cabinet. First, secure the board using four M6 mounting bolts at the corners. After that, connect the main chassis ground cable to the bonding stud. Then, attach each card’s ground wire to its designated ground stud. Finally, verify ground continuity between all points using a low-resistance ohmmeter.

Energy Discharge and Safety Notice

This GE IS200JGPAG1A IS200JGPAG1APR1 Ground and Power Terminal Board stores no energy whatsoever. Therefore, you can handle it immediately after power removal. However, external wires may carry hazardous voltages from connected devices. Always verify zero voltage before touching any terminal.

Status Indication and Diagnostics

This terminal board has no active indicators or LEDs. However, each terminal includes a test point for continuity verification. You can check ground integrity using a simple ohmmeter between any two points. The clear labeling helps technicians identify grounding points quickly during installation.

Details