The GE IS200IVFBG1A IS200IVFBG1AAA manages input and output signals for turbine control systems. This board provides a compact interface for field device connectivity. It weighs approximately 0.79 kg and occupies a single slot in the rack. Its dimensions measure 30.5 cm in length, 15.2 cm in width, and 3.2 cm in height.
Technical Specifications & Hardware Details
The GE IS200IVFBG1A IS200IVFBG1AAA features twenty configurable digital I/O channels for flexible operation. A single backplane connector interfaces this board with the Mark VI controller. This board stores no energy internally because it contains no batteries. Five main components form the complete assembly: the PCB, the input buffers, the output drivers, the status LEDs, and the backplane connector.
| Parameter | Specification |
|---|---|
| Product Model | GE IS200IVFBG1A IS200IVFBG1AAA |
| Weight | 0.79 kg (1.74 lbs) |
| Dimensions (L×W×H) | 30.5 cm × 15.2 cm × 3.2 cm |
| Number of Components | 5 assemblies (PCB, input buffers, output drivers, LEDs, backplane) |
| Digital I/O Channels | 20 configurable (10 input, 10 output) |
| Digital Input Range | 24V DC (18-30V DC range) |
| Digital Input Current | 7 mA per channel at 24V DC |
| Digital Output Rating | 0.5A per channel at 24V DC |
| Output Protection | Overcurrent and short-circuit |
| Response Time | 1 ms typical |
| Isolation | Opto-isolated (1500V RMS) |
| Energy Storage | None (battery-free design) |
| Status Indicators | 20 front-panel LEDs (one per channel) |
| Backplane Interface | Single 96-pin connector |
I/O Configuration and Field Connectivity
You can configure each channel as either input or output via the Mark VI software. For input connections, dry contacts or 24V DC sensors work directly with the GE IS200IVFBG1A IS200IVFBG1AAA. The output drivers handle small solenoids, relays, and indicator lamps safely. Onboard overcurrent protection shuts down any channel that draws excessive current.
Installation and Operational Environment
You can mount this board into any Mark VI rack slot with proper alignment. The board draws 280 mA from the 24V DC supply during normal operation. Furthermore, it operates reliably within a -30°C to 65°C temperature range. Consequently, the GE IS200IVFBG1A IS200IVFBG1AAA requires zero scheduled maintenance. Just verify field wiring connections during routine turbine inspections.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.