Why This Insync Delay Board Manages Synchronization Timing
The GE IS200ISBDG1A IS200ISBDG1AAA controls timing delays for generator synchronization. This board ensures proper phase matching before breaker closure. It introduces precise delays between sync-check and close commands. For this reason, the GE IS200ISBDG1A IS200ISBDG1AAA prevents out-of-phase breaker closures. It also protects the generator and turbine from mechanical stress.
Technical Specifications of the Board
We engineer this GE IS200ISBDG1A IS200ISBDG1AAA for accurate delay generation. It operates on a 24V DC power supply with ±10% tolerance. The board features four independent programmable delay channels. Each channel includes a precision timing circuit. On‑board capacitors provide energy storage for timing stability.
| Specification | Value | Additional Notes |
|---|---|---|
| Full Model | GE IS200ISBDG1A IS200ISBDG1AAA | Insync Delay Board |
| Power Supply | 24V DC ±10% | Standard industrial level |
| Delay Channels | Four independent channels | Programmable timing circuits |
| Delay Range | 0.1 to 10 seconds | Adjustable per channel |
| Delay Accuracy | ±1% of setpoint | For precise synchronization |
| Input Signals | Four discrete inputs | Trigger delay start |
| Output Signals | Four relay outputs | Form C contacts |
| Contact Rating | 2A at 30V DC | For sync-close commands |
| Energy Storage | Capacitor bank | 220µF for timing stability |
| Dimensions | 180mm x 105mm x 55mm | Fits Mark V auxiliary racks |
| Weight | 0.48 kg (approximately) | Lightweight for easy handling |
| Interface Type | Backplane connector + terminal block | Gold‑plated for reliability |
| Component Count | 58 discrete components | Timers, relays, capacitors, resistors |
Hardware Architecture and Timing Logic
The GE IS200ISBDG1A IS200ISBDG1AAA uses analog timing circuits for delay generation. These circuits do not require software configuration. Moving to input side, four discrete signals trigger independent delay timers. The board then closes corresponding relay outputs after each delay expires. Moreover, the G1AAA revision adds temperature-compensated timing components. This improvement maintains accuracy across the full operating temperature range.
Installation and Configuration Guidelines
You must de‑energize the entire cabinet before removing this board. Remove the GE IS200ISBDG1A IS200ISBDG1AAA from its rack slot carefully. Then insert the replacement board into the exact same slot position. Verify all backplane pins align correctly with the connector. Skipping this step may cause incorrect sync timing. Additionally, verify all delay settings match the original board values. Use a stopwatch to confirm each delay channel operates correctly.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.