I/O modules

Core Function for Bus Redundancy Management

The GE IS200ISBBG1A IS200ISBBG1AAB Insync Bus Bypass Card provides automatic bypass switching for Insync drive networks. This module isolates faulty nodes without interrupting normal system operation. Therefore, you can maintain continuous communication across your entire drive line.

Physical Dimensions and Weight Details

This bypass card measures 14.2 cm in length and 9.8 cm in width. Its height reaches only 2.1 cm for slim cabinet mounting. The GE IS200ISBBG1A IS200ISBBG1AAB Insync Bus Bypass Card weighs exactly 0.32 kilograms. For comparison, this weight suits standard DIN rail or panel installation easily.

Connector Interfaces and Component Count

You will find two DB9 serial ports on the front edge. The GE IS200ISBBG1A IS200ISBBG1AAB Insync Bus Bypass Card also includes one LED status indicator array. This array contains four separate LEDs for power and bypass conditions. Inside the card, a single multilayer PCB holds sixty-three discrete components. These components include resistors, diodes, and relay switches.

Energy Storage and Power Characteristics

This bypass card stores no energy in batteries or large capacitors. Instead, it draws operational power directly from the backplane connection. The GE IS200ISBBG1A IS200ISBBG1AAB Insync Bus Bypass Card consumes only 3.5 watts during normal operation. Consequently, you will never need to replace internal power cells.

Installation and Environmental Tolerance

You can insert this card into any compatible Insync series rack slot. The module operates reliably from -10°C to +55°C ambient temperature. It also withstands 10% to 90% humidity without condensation formation. For long-term use, the relay contacts support 100,000 switching cycles.

Key Technical Data (List Format)

• Full Product Name: GE IS200ISBBG1A IS200ISBBG1AAB Insync Bus Bypass Card

• Product Weight: 0.32 kg (0.71 lbs)

• Physical Dimensions: 14.2 cm (L) x 9.8 cm (W) x 2.1 cm (H)

• Interface Type: Two DB9 serial ports (RS-485)

• Internal Components: One 6-layer PCB + 63 discrete components + 4 relay switches

• Energy Storage: None (no batteries, no large capacitors)

• Power Consumption: 3.5 watts (from backplane)

• LED Indicators: Four (Power, Bypass Active, Fault, Link OK)

• Operating Temperature: -10°C to +55°C

• Relay Cycle Life: 100,000 mechanical operations

Detailed Parameter Table

Details