I/O modules

Precision DC Control for Innovation Series Drives

The GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card manages DC bus voltage monitoring and regulation. This module handles both analog input and discrete output signals simultaneously. Therefore, you can achieve accurate current control within your drive system.

Physical Dimensions and Weight Specifications

This DC card measures 15.5 cm in length and 10.2 cm in width. Its total height reaches only 2.5 cm for compact rack mounting. The GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card weighs exactly 0.28 kilograms. This lightweight design simplifies installation in crowded control cabinets.

Connector Interfaces and Component Count

You will find one 20-pin female ribbon connector on the rear edge. The GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card also features two 6-pin terminal blocks for field wiring. These terminal blocks accept 16 to 24 AWG copper wires easily. Inside the card, a single 8-layer PCB holds ninety-four discrete components. These components include operational amplifiers, resistors, and protection diodes.

Energy Storage and Power Characteristics

This DC card stores minimal energy using only small filter capacitors. It draws its operational power from the VME backplane connection. The GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card consumes just 5.2 watts during normal operation. Consequently, you will never need to replace any internal batteries.

Signal Processing and Protection Features

Four analog input channels accept 0 to 10V DC signals from sensors. Two discrete output channels provide 24V DC at 0.5 amps each. The GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card includes optical isolation for all field connections. This isolation prevents ground loops from corrupting your measurement data.

Environmental Tolerance and Reliability

You can operate this card reliably from -20°C to +60°C ambient temperature. The module also withstands 5% to 95% humidity without any condensation. For long-term use, the terminal blocks support 200 insertion and removal cycles.

Key Technical Data (List Format)

• Full Product Name: GE IS200IIDAG1A IS200IIDAG1ABB Direct Current Innovation Card

• Product Weight: 0.28 kg (0.62 lbs)

• Physical Dimensions: 15.5 cm (L) x 10.2 cm (W) x 2.5 cm (H)

• Interface Type: One 20-pin ribbon connector + two 6-pin terminal blocks

• Internal Components: One 8-layer PCB + 94 discrete components

• Energy Storage: Small filter capacitors only (no batteries)

• Power Consumption: 5.2 watts (from VME backplane)

• Analog Inputs: 4 channels, 0-10V DC, 12-bit resolution

• Discrete Outputs: 2 channels, 24V DC at 0.5A each

• Isolation: Optical barrier between logic and field circuits

• Operating Temperature: -20°C to +60°C

Detailed Parameter Table

Details