The GE IS200ICCAH1A IS200ICCAH1ADB manages drive control functions for industrial motor applications. This board generates precise switching signals for power semiconductor devices. It weighs approximately 0.86 kg and occupies a single slot in the rack. Its dimensions measure 30.5 cm in length, 15.2 cm in width, and 3.2 cm in height.
Technical Specifications & Hardware Details
The GE IS200ICCAH1A IS200ICCAH1ADB features six gate drive outputs for three-phase power control. A high-speed backplane connector links this board to the Mark VI processor. This board stores no energy internally because it contains no batteries. Seven main components form the complete assembly: the PCB, the gate drivers, the protection circuits, the current sensors, the status LEDs, the fiber optic interface, and the backplane connector.
| Parameter | Specification |
|---|---|
| Product Model | GE IS200ICCAH1A IS200ICCAH1ADB |
| Weight | 0.86 kg (1.90 lbs) |
| Dimensions (L×W×H) | 30.5 cm × 15.2 cm × 3.2 cm |
| Number of Components | 7 assemblies (PCB, drivers, protection, sensors, LEDs, fiber, backplane) |
| Gate Drive Outputs | 6 channels (3-phase, upper and lower) |
| Output Voltage | +15V / -9V for IGBT gates |
| Peak Output Current | 5A per channel |
| Switching Frequency | 2 to 12 kHz (programmable) |
| Current Sensing | 3 integrated hall-effect sensors |
| Protection Features | Desaturation, overcurrent, short-circuit |
| Response Time | 1.5 µs for fault detection |
| Fiber Optic Port | 1 transceiver for isolated feedback |
| Energy Storage | None (battery-free design) |
| Status Indicators | 8 front-panel LEDs (status and faults) |
| Backplane Interface | Single 96-pin connector |
Drive Control and Protection Functions
You can configure the GE IS200ICCAH1A IS200ICCAH1ADB for various motor control topologies. The onboard desaturation detection shuts down faulty IGBTs within 2 microseconds. For current feedback, the integrated hall-effect sensors measure phase currents directly. The fiber optic port provides isolated communication with external monitoring systems.
Installation and Operational Environment
You can mount this board into any Mark VI rack slot with proper alignment. The board draws 420 mA from the 24V DC supply during normal operation. Furthermore, it operates reliably within a -30°C to 65°C temperature range. Consequently, the GE IS200ICCAH1A IS200ICCAH1ADB requires zero scheduled maintenance. Just verify gate drive connections during routine drive inspections.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.