The GE IS200ICBDH1A IS200ICBDH1ACB serves as a central processing unit for innovation drive applications. This board executes control algorithms for motor and generator systems. It weighs approximately 0.91 kg and occupies a single slot in the rack. Its dimensions measure 30.5 cm in length, 15.2 cm in width, and 3.2 cm in height.
Technical Specifications & Hardware Details
The GE IS200ICBDH1A IS200ICBDH1ACB features a high-performance processor for real-time control tasks. Two Ethernet ports and one serial port provide flexible communication options. This board stores configuration data in onboard non-volatile memory. Six main components form the complete assembly: the PCB, the processor module, the communication interfaces, the memory chips, the status LEDs, and the backplane connector.
| Parameter | Specification |
|---|---|
| Product Model | GE IS200ICBDH1A IS200ICBDH1ACB |
| Weight | 0.91 kg (2.01 lbs) |
| Dimensions (L×W×H) | 30.5 cm × 15.2 cm × 3.2 cm |
| Number of Components | 6 assemblies (PCB, processor, comms, memory, LEDs, backplane) |
| Processor Speed | 300 MHz |
| Ethernet Ports | 2 × 10/100 Mbps (RJ45) |
| Serial Port | 1 × RS-232 (DB-9) |
| Memory Type | 256 MB flash, 128 MB RAM |
| Memory Retention | Non-volatile flash (no battery needed) |
| Software Support | Mark VI control applications |
| Firmware Update | Via Ethernet or serial port |
| Energy Storage | None (battery-free design) |
| Status Indicators | 6 front-panel LEDs (Power, Run, Fault, Link, Act, Serial) |
| Backplane Interface | Single 96-pin connector |
Control Processing and Communication
You can upload control algorithms to the GE IS200ICBDH1A IS200ICBDH1ACB via Ethernet. The dual network ports support redundant communication for critical turbine operations. For local diagnostics, connect a laptop to the RS-232 serial port. The onboard flash memory retains all configuration data during power cycles.
Installation and Operational Environment
You can mount this board into any Mark VI rack slot with proper alignment. The board draws 480 mA from the 24V DC supply during normal operation. Furthermore, it operates reliably within a -30°C to 65°C temperature range. Consequently, the GE IS200ICBDH1A IS200ICBDH1ACB requires no battery replacement over its lifetime. Just check the LED status indicators during routine system inspections.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.