The GE IS200FOSBH1A IS200FOSBH1AAA transmits control signals using fiber optic communication technology. This module eliminates electrical interference problems in noisy industrial environments. It weighs approximately 0.75 kg and occupies a single slot in the rack. Its dimensions measure 30.5 cm in length, 15.2 cm in width, and 3.2 cm in height.
Technical Specifications & Hardware Details
The GE IS200FOSBH1A IS200FOSBH1AAA features eight independent fiber optic channels for signal transmission. A single backplane connector interfaces this module with the Mark VI controller. This board stores no energy internally because it contains no batteries. Five main components form the complete assembly: the PCB, the fiber transceivers, the signal processors, the status LEDs, and the backplane connector.
| Parameter | Specification |
|---|---|
| Product Model | GE IS200FOSBH1A IS200FOSBH1AAA |
| Weight | 0.75 kg (1.65 lbs) |
| Dimensions (L×W×H) | 30.5 cm × 15.2 cm × 3.2 cm |
| Number of Components | 5 assemblies (PCB, transceivers, processors, LEDs, backplane) |
| Fiber Channels | 8 independent channels (4 TX, 4 RX) |
| Connector Type | ST-style optical connectors |
| Wavelength | 850 nm (multimode) |
| Maximum Cable Length | 2 km per channel |
| Data Rate | 10 Mbps per channel |
| Optical Output Power | -15 dBm typical |
| Receiver Sensitivity | -30 dBm |
| Energy Storage | None (battery-free design) |
| Status Indicators | 8 front-panel LEDs (one per channel) |
| Backplane Interface | Single 96-pin connector |
Signal Transmission and Noise Immunity
You can connect fiber optic cables directly to the GE IS200FOSBH1A IS200FOSBH1AAA using standard ST connectors. The optical link provides complete electrical isolation between connected devices. For long-distance runs, you can extend cables up to 2 kilometers without signal loss. This module also supports a loopback mode for diagnostic testing of each channel.
Installation and Operational Environment
You can mount this module into any Mark VI rack slot with proper alignment. The module draws 280 mA from the 24V DC supply during normal operation. Furthermore, it operates reliably within a -30°C to 65°C temperature range. Consequently, the GE IS200FOSBH1A IS200FOSBH1AAA requires zero scheduled maintenance. Just clean the fiber connectors during routine turbine inspections.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.