This board enables serial communication between GE Mark VIe controllers and external devices. It handles RS-232 and RS-485 protocols for industrial data exchange. Therefore, it connects turbines to remote monitoring systems without additional converters.
Technical Specifications of GE IS200ESYSH3A IS200ESYSH3AAA
The GE IS200ESYSH3A IS200ESYSH3AAA measures 22.5 cm in length and 16.0 cm in width. Its board weight equals approximately 0.38 kg for straightforward rack mounting. A single 64-pin male connector links this board to the VME backplane. Additionally, the board provides two independent serial communication ports.
| Parameter | Specification |
|---|---|
| Brand | General Electric (GE) |
| Full Model | IS200ESYSH3A IS200ESYSH3AAA |
| Category | Serial Link Interface Board |
| Dimensions (L x W) | 22.5 cm x 16.0 cm (8.86″ x 6.30″) |
| Board Weight | 0.38 kg (0.84 lbs) |
| Primary Interface | 1 x 64-pin Male Connector |
| Serial Ports | 2 Independent Ports (DB9 Female Connectors) |
| Supported Protocols | RS-232 and RS-485 (Software Selectable) |
| Baud Rate Range | 300 to 115200 baud |
| Data Bits | 7 or 8 Bits (Configurable) |
| Parity Options | None, Even, Odd, Mark, Space |
| Stop Bits | 1 or 2 Bits |
| On-Board Components | 2 UART Chips + 3 Transceivers + 4 Protection Diodes |
| Energy Storage | 2 x 47 µF Tantalum Capacitors (16V) |
| Operating Voltage | +5 VDC from Backplane Only |
| Isolation Voltage | 2500 Vrms (Port to Backplane) |
Energy Storage and Data Integrity
The GE IS200ESYSH3A IS200ESYSH3AAA stores energy using two tantalum capacitors. These capacitors filter power supply noise for stable UART operation. Each serial port includes protection diodes against electrostatic discharge events. Consequently, this board maintains error-free communication in electrically noisy environments.
Installation and Connector Layout
You will find two DB9 female connectors along the board’s front panel edge. Each connector supports either RS-232 or RS-485 without hardware jumpers. The board also features four mounting holes at each corner for secure attachment. Thus, it fits perfectly into any standard Mark VIe serial communication slot.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.