This printed circuit board manages communication between Mark VIe controllers and plant networks. It handles serial data exchange using RS-232 and RS-485 protocols. Therefore, it connects turbine control systems to supervisory computers seamlessly.
Technical Specifications of GE IS200ESYSH1A IS200ESYSH1ABB
The GE IS200ESYSH1A IS200ESYSH1ABB measures 22.5 cm in length and 16.0 cm in width. Its board weight equals approximately 0.36 kg for straightforward rack mounting. A single 64-pin male connector links this board to the VME backplane. Additionally, the board provides two independent serial communication ports.
| Parameter | Specification |
|---|---|
| Brand | General Electric (GE) |
| Full Model | IS200ESYSH1A IS200ESYSH1ABB |
| Category | System Interface PCB |
| Dimensions (L x W) | 22.5 cm x 16.0 cm (8.86″ x 6.30″) |
| Board Weight | 0.36 kg (0.79 lbs) |
| Primary Interface | 1 x 64-pin Male Connector |
| Serial Ports | 2 Independent Ports (DB9 Male Connectors) |
| Supported Protocols | RS-232 and RS-485 (Software Selectable) |
| Baud Rate Range | 300 to 115200 baud |
| Data Format | 7 or 8 Data Bits, 1 or 2 Stop Bits |
| Parity Options | None, Even, Odd, Mark, Space |
| Handshake Lines | RTS, CTS, DTR, DSR (RS-232 Only) |
| On-Board Components | 2 UART Controllers + 4 Line Transceivers + 6 Protection Diodes |
| Energy Storage | 3 x 22 µF Tantalum Capacitors (16V) |
| Operating Voltage | +5 VDC from Backplane Only |
| Isolation Voltage | 2500 Vrms (Port to Backplane) |
| ESD Protection | ±15 kV per Channel (Human Body Model) |
| Operating Temperature | 0°C to +55°C (32°F to 131°F) |
Energy Storage and Signal Integrity
The GE IS200ESYSH1A IS200ESYSH1ABB stores energy using three tantalum capacitors. These capacitors filter power supply noise for stable UART operation. Each serial port includes robust ESD protection against static discharges. Consequently, this board maintains error-free communication in industrial environments.
Installation and Connector Layout
You will find two DB9 male connectors on the board’s front panel edge. Each connector supports software-defined protocol selection without hardware jumpers. The board also features four mounting holes at each corner for secure attachment. Thus, it fits perfectly into any standard Mark VIe system interface slot.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.