The IS200DSFCG1A IS200DSFCG1ACB monitors current feedback from driver shunt resistors. This board measures DC link currents for motor control applications. Its rectangular frame measures 230 millimeters in width. The board height reaches 165 millimeters exactly. Depth stays at a compact 24 millimeters. You will find this unit weighs approximately 0.76 kilograms. Therefore, installation requires four standard mounting screws. Two shunt input connectors link directly to external current sensing resistors.
Physical Layout and Connectors
Each shunt input uses a two-terminal Phoenix connector for secure wiring. A third connector provides isolated analog output to the main control. Four plated mounting holes align with standard GE rack patterns. You can mount this board in any orientation without performance loss. The metal shield covers sensitive analog sections to reduce electromagnetic noise.
Technical Specifications
| Parameter | Specification |
|---|---|
| Board Width | 230 mm |
| Board Height | 165 mm |
| Board Depth | 24 mm |
| Unit Weight | 0.76 kg |
| Shunt Inputs | 2 x 2-terminal Phoenix |
| Analog Output | 1 x isolated (0–10V or 4–20mA) |
| Component Total | 198 discrete parts |
| Energy Storage | 680 µF capacitor bank |
| Input Voltage Range | ±100 mV to ±1V (shunt) |
| Gain Accuracy | ±0.5% over full range |
| Bandwidth | 5 kHz |
| Isolation Voltage | 1500V RMS |
| Operating Temperature | -20°C to +65°C |
Internal Design and Energy Storage
The IS200DSFCG1A IS200DSFCG1ACB contains exactly 198 discrete components. A 680 microfarad capacitor bank filters power supply noise for stable readings. Dedicated differential amplifiers reject common-mode voltage from each shunt. Two precision isolation amplifiers separate input from output circuits. Each isolation amplifier withstands 1500 volts RMS continuously. Onboard jumpers let you select voltage or current output format.
Operational Performance
This driver shunt board accepts input ranges from ±100 mV to ±1 volt. It amplifies these low-level signals to standard control levels. Moreover, the board provides adjustable gain settings via DIP switches. You can configure each channel independently for different shunt resistors. The unit filters high-frequency noise above 5 kHz bandwidth. Three status LEDs indicate power presence and output saturation. Consequently, you achieve accurate current measurement in motor drives. GE designed this board for high-noise industrial environments. Its differential inputs cancel ground loop interference effectively.
In summary, the IS200DSFCG1A IS200DSFCG1ACB delivers precise current feedback. Use this board for DC drives or servo systems. It ensures accurate torque control under varying loads. Order this driver shunt board for your motor control application.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.