This PCB board manages power input and rectification for GE Speedtronic turbine systems. You will find the GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board converting incoming AC power to stable DC voltage. Its robust component layout supports continuous operation in demanding power generation environments.
Technical Specifications
This board contains six discrete rectifier diodes arranged in a three-phase bridge configuration. You can also locate two large filter capacitors for voltage smoothing purposes. The GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board stores significant energy within its filter capacitor bank. These capacitors discharge gradually after you remove system power. Consequently, you should wait five minutes before handling this board.
| Parameter | Specification |
|---|---|
| Full Product Name | GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board |
| Series | Mark VI / Speedtronic |
| Board Type | Power Input / Rectifier Board |
| Weight | 1.4 kg |
| Length | 32.0 cm |
| Width | 21.0 cm |
| Rectifier Diodes | 6 |
| Filter Capacitors | 2 (large can type) |
| Input Connector | 1 x 5-pin terminal block |
| Output Connector | 1 x 4-pin header |
| Energy Storage | 2 x 4700 µF capacitors |
Power Conversion Details
The GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board accepts three-phase AC input from 200 to 480 VAC. Each diode handles up to 25 amps of continuous forward current. You can monitor the DC output voltage through two test points on the board surface. Moreover, the board includes a small bleed resistor across each capacitor. This resistor slowly discharges stored energy for technician safety.
Mechanical Integration and Mounting
You must mount the GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board onto four insulated standoffs inside the cabinet. After positioning, secure the board using four M3 screws through the corner holes. The board measures exactly 32.0 centimeters in length and 21.0 centimeters in width. Its total weight reaches approximately 1.4 kilograms due to the large capacitor components. Furthermore, the board includes a protective conformal coating against moisture and dust.
Environmental and Storage Guidelines
You should store this GE IS200BPIRG1A IS200BPIRG1AAA Speedtronic Turbine Control PCB Board in an anti-static bag away from vibration. The board operates reliably between -30°C and +65°C ambient temperature. Likewise, keep the unit away from conductive dust or condensing humidity. Because the board uses passive rectification only, it requires no firmware updates or software configuration.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.