The GE IS200BPIBG1A IS200BPIBG1ADB monitors phase relationships in turbine generator systems. This module processes voltage and current signals from three-phase power sources. It weighs approximately 0.87 kg and occupies a single slot in the rack. Its dimensions measure 30.5 cm in length, 15.2 cm in width, and 3.2 cm in height.
Technical Specifications & Hardware Details
The GE IS200BPIBG1A IS200BPIBG1ADB features three independent phase input channels for complete coverage. A single backplane connector links this module to the Mark VI controller. This board stores no energy internally because it contains no batteries. Five main components form the complete assembly: the PCB, the phase sensors, the isolation circuits, the status LEDs, and the backplane connector.
| Parameter | Specification |
|---|---|
| Product Model | GE IS200BPIBG1A IS200BPIBG1ADB |
| Weight | 0.87 kg (1.92 lbs) |
| Dimensions (L×W×H) | 30.5 cm × 15.2 cm × 3.2 cm |
| Number of Components | 5 assemblies (PCB, sensors, isolation, LEDs, backplane connector) |
| Phase Input Channels | 3 independent channels (A, B, C phases) |
| Voltage Input Range | 0-600V AC (nominal) |
| Current Input Range | 0-5A AC (via external CTs) |
| Frequency Range | 45 to 65 Hz |
| Phase Angle Accuracy | ±0.5 degrees |
| Isolation Voltage | 2500V RMS (input to logic side) |
| Response Time | 10 ms typical |
| Energy Storage | None (battery-free design) |
| Status Indicators | 3 front-panel LEDs (Phase A, B, C active) |
| Backplane Interface | Single 96-pin connector |
Phase Monitoring and Protection Functions
You can connect potential transformers directly to the GE IS200BPIBG1A IS200BPIBG1ADB for voltage sensing. Current transformers then feed secondary signals into the module’s dedicated inputs. The onboard algorithms detect phase loss, reversal, and imbalance conditions instantly. For turbine protection, this module trips the system upon detecting critical phase anomalies.
Installation and Operational Environment
You can mount this module into any Mark VI rack slot with proper alignment. The module draws 310 mA from the 24V DC supply during normal operation. Furthermore, it operates reliably within a -30°C to 65°C temperature range. Consequently, the GE IS200BPIBG1A IS200BPIBG1ADB requires zero scheduled maintenance. Just verify input connections during routine turbine inspections.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.