The GE IS200BAPOH1A IS200BAPOH1APR1 belongs to the Mark VI series. General Electric designed this board as a daughter expansion module. This component adds dedicated output channels to the main processor. It also provides signal conditioning for actuator control.
Technical Specifications
The table below lists all key parameters for the GE IS200BAPOH1A IS200BAPOH1APR1.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Full Model | IS200BAPOH1A / IS200BAPOH1APR1 |
| Product Type | Daughter Board (Analog Output) |
| Series | Mark VI |
| Width | 10.0 inches (25.4 cm) |
| Height | 7.0 inches (17.8 cm) |
| Weight | 1.0 lb (0.45 kg) |
| Component Count | Over 140 surface-mount devices |
| Main Interface | One 64-pin male DIN connector |
| Analog Outputs | 8 single-ended 12-bit channels |
| Output Range | 0-10 V DC or 4-20 mA |
| Output Current | 20 mA per channel maximum |
| Settling Time | Less than 100 microseconds |
| Accuracy | ±0.25% of full scale |
| Energy Storage | Ceramic and tantalum capacitors |
| Status Indicators | Two LEDs (power and active) |
Daughter Board Features
The GE IS200BAPOH1A IS200BAPOH1APR1 uses a rugged four-layer PCB. Over 140 resistors, capacitors, and precision op-amps generate output signals. A single 64-pin DIN connector links this board to the host processor. Consequently, the main board gains eight analog output channels. Two onboard LEDs show power and active status. Moreover, tantalum capacitors provide stable energy for output circuits.
Output Capabilities
You get eight single-ended analog outputs on this daughter board. Each channel offers 12-bit resolution for smooth control signals. The GE IS200BAPOH1A IS200BAPOH1APR1 delivers 0-10 V DC or 4-20 mA output ranges. Each channel supplies up to 20 mA for driving actuators. Settling time stays under 100 microseconds for fast response. Output accuracy reaches ±0.25% of full scale. Therefore, this board provides precise control for valves, drives, and positioners.
Power and Energy Storage
You must install this board inside a protected Mark VI cabinet. The host processor supplies 5 VDC and ±15 VDC to the daughter board. Ceramic capacitors filter high-frequency noise on power lines. Tantalum capacitors store energy for stable output references. As a result, the board delivers consistent analog control signals.
Mechanical Layout
This Mark VI daughter board measures exactly 25.4 cm in width. Its height reaches 17.8 cm. The total weight equals just 0.45 kg. As a result, this board saves valuable rack space. The lightweight design also reduces stress on the host connector. Always handle this daughter board by its edges. This precaution prevents electrostatic discharge damage.
Installation Context
This board mounts directly onto compatible Mark VI processor cards. Its compact size allows easy system expansion without extra rack space. The robust design handles continuous industrial output control. Choose the GE IS200BAPOH1A IS200BAPOH1APR1 for your analog output expansion needs.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.