The IC200CHS112A expansion base terminal gives VersaMax systems a compact platform for adding I/O modules close to field devices. Panel builders choose this base for its simple DIN rail mounting and clear terminal arrangement. Furthermore, the unit connects to the host controller through a standard expansion cable.
Technical Specifications Overview
| Parameter | Specification |
|---|---|
| Model | IC200CHS112A |
| Category | Expansion Base Terminal |
| Module Slots | 1 I/O module position |
| Backplane Interface | VersaMax expansion bus with edge connector |
| Power Distribution | 5 V DC and 24 V DC rails to the slot |
| Connector Type | Screw terminal strips and expansion cable header |
| Isolation | 250 V DC between field wiring and logic |
| Power Consumption | 1.1 W typical (base overhead) |
| Operating Temperature | 0°C to 60°C |
| Dimensions | 95 mm × 70 mm × 45 mm |
| Weight | 0.16 kg |
| Mounting | DIN rail or panel mount |
| Component Count | Approximately 30 components |
| Energy Storage | Filter capacitor bank for 5 ms rail hold-up |
Base Design and Expansion Function
A single module slot holds one VersaMax I/O module close to remote field devices. Consequently, builders shorten sensor wiring runs and reduce signal loss. The base distributes 5 V DC and 24 V DC rails to the installed module. Additionally, screw terminal strips simplify field connections during commissioning.
Physical Characteristics and Installation
The 95 mm × 70 mm × 45 mm housing snaps onto standard DIN rail without tools. Technicians slide the I/O module into the guide rails and tighten two retaining screws. Furthermore, the 0.16 kg weight keeps the base stable during wiring changes. An expansion cable header links the unit to the host controller.
Practical Benefits for Distributed I/O
Remote bases cut cable length and installation cost on large machines. Therefore, engineers place I/O exactly where field devices need it. The IC200CHS112A adds only 1.1 W of overhead, so thermal budgets stay comfortable. Finally, about 30 components pass GE inspection for dependable long-term operation.
Details
| Weight | 1.5 kg |
|---|---|
| Dimensions | 278 × 194 × 42 mm |

Reviews
There are no reviews yet.