The GE DS200PTBAG1A DS200PTBAG1AEC protection termination module connects protective relay circuits to Mark V systems. This module provides a secure interface between field protection devices and the main controller. You will find this termination module in turbine protection panels and switchgear cabinets. Its rugged design ensures reliable operation in critical safety circuits.
Termination Architecture
This protection module provides 40 screw terminal connections for field wiring. Consequently, you can connect multiple protective devices without additional hardware. The GE DS200PTBAG1A DS200PTBAG1AEC includes built-in surge suppression on each channel. Moreover, clearly marked terminals simplify wiring and troubleshooting. You can terminate wires quickly using standard slotted screwdrivers.
Technical Specifications
| Parameter | Value |
|---|---|
| Terminal Count | 40 (screw clamp type) |
| Wire Gauge Range | 22 AWG to 14 AWG (0.34 to 2.0 mm²) |
| Voltage Rating | 250V AC / 150V DC maximum |
| Current Rating | 3A per terminal continuous |
| Surge Protection | MOV, 275V AC clamp, 1500W peak |
| Contact Material | Brass with nickel plating |
| Torque Specification | 0.5 Nm (4.4 lb-in) |
| Dimensions | 280mm x 170mm x 30mm |
| Weight | 0.65 kg (1.43 lbs) |
| PCB Layers | 4 |
| Onboard Components | 40 terminals, 40 MOVs, 1 ground bar |
| Connector Count | 2 (ribbon cable to I/O, ground stud) |
| Status Indicators | None (passive termination) |
| Energy Storage | None (passive module) |
| Isolation Voltage | 1500V (terminal to backplane) |
| Response Time | <5 ns (surge clamping) |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
Surge Protection and Field Wiring
The unit includes metal-oxide varistors across each terminal channel. Therefore, it clamps voltage spikes and protects downstream electronics. This module replaces the DS200PTBAG1AEC version without any wiring changes. Simply remove the old module and install this one. GE designed this termination module for single-slot installation. Hence, it fits directly into existing Mark V rack positions.
Four PCB layers separate field wiring traces from backplane signals. Two connectors handle all signal and ground connections. The GE DS200PTBAG1A DS200PTBAG1AEC includes a dedicated ground bar for surge current return. Accordingly, it safely diverts transient energy away from sensitive circuits. This feature proves essential for protecting control systems in lightning-prone areas.
Installation and Wiring Guide
You can terminate both stranded and solid copper wires securely. The screw clamps accept wires without special ferrules or lugs. The GE DS200PTBAG1A DS200PTBAG1AEC works with all GE Mark V protection I/O boards. Always strip 6-8 mm of insulation before inserting wires. Proper torque on terminal screws prevents loose connections over time.
Each MOV provides bi-directional surge protection for AC and DC circuits. The module does not require any configuration or calibration. The GE DS200PTBAG1A DS200PTBAG1AEC simplifies protection circuit wiring for turbine systems. Installation requires only a flathead screwdriver for terminal connections. This module operates reliably in non-condensing environments with adequate clearance.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.