Autony Tech Limited

I/O modules

GE A20B-0004-0500 Control Program Memory PCB

Brand:  GE Fanuc
Model Number:A20B-0004-0500
Type:  Control Program Memory PCB
Product Origin: USA
Price: USD 99
Dimensions:  278 mm x 194 mm x 42 mm
Weight: 1.5 kg
Warranty: 12 months

1000 in stock

SKU A20B-0004-0500 Category Tags , Brand:

The A20B-0004-0500 control program memory PCB stores and delivers firmware for GE CNC control systems with dependable data retention. Maintenance engineers install this board when program memory faults interrupt machine operation. Furthermore, the PCB slides into the existing chassis slot without any hardware changes.

Technical Specifications Overview

ParameterSpecification
ModelA20B-0004-0500
CategoryControl Program Memory PCB
Memory TypeEPROM-based program storage
Memory Capacity512 KB total program memory
Connector InterfaceBackplane edge connector plus ribbon header
Operating Voltage5 V DC logic supply
IsolationNo galvanic isolation (logic-level memory board)
Power Consumption1.4 W typical
Operating Temperature0°C to 55°C
Dimensions130 mm × 85 mm × 16 mm
Weight0.13 kg
MountingChassis slot or card guide
Component CountApproximately 40 components
Energy StorageBackup capacitor for 6 ms memory retention

Memory Architecture and Data Retention

EPROM-based storage holds 512 KB of control program code without battery dependence. Consequently, the board keeps firmware intact through long power-off periods. The backplane edge connector carries program data to the CNC processor. Additionally, a ribbon header supports firmware updates during service work.

Physical Characteristics and Installation

The 130 mm × 85 mm × 16 mm PCB slides into a standard chassis card guide. Technicians seat the edge connector firmly and route the ribbon cable to the service port. Furthermore, the 0.13 kg weight allows one-person handling during board swaps. A backup capacitor retains memory state for 6 ms during brief supply dips.

Reliability Features for CNC Memory Systems

EPROM storage resists data corruption from power interruptions and electrical noise. Therefore, machine programs survive harsh factory conditions without loss. The A20B-0004-0500 draws only 1.4 W, so chassis thermal load stays minimal. Finally, about 40 components pass GE screening for dependable long-term operation.

Details

Weight1.5 kg
Dimensions278 × 194 × 42 mm

Reviews

There are no reviews yet.

Be the first to review “GE A20B-0004-0500 Control Program Memory PCB”

Your email address will not be published. Required fields are marked *