Field-Level Device Connectivity
The Fuji NP1L-TL1 provides device-level communication for the NP1 series programmable controllers. This module enables connectivity with sensors, actuators, and other field devices . It supports a data transfer rate of 187.5 kbps for reliable signal exchange . Consequently, this unit suits discrete manufacturing and assembly line applications .
I/O Mapping and Communication Capability
The NP1L-TL1 handles up to 64 digital I/O points through its field network interface . It supports both bit and word data access from connected devices . The module automatically maps remote I/O into the PLC memory area . Furthermore, it provides cyclic data exchange without explicit programming overhead .
Network Architecture and Slave Support
This module operates as a master on the device-level network segment . It manages up to 31 slave devices on a single bus . The Fuji NP1L-TL1 uses shielded twisted-pair cabling for noise immunity . It also includes termination resistors for proper signal reflection control .
Diagnostic and Status Monitoring
LED indicators show network activity and communication error status . The module provides diagnostic data through the PLC’s system registers . The Fuji NP1L-TL1 includes a watchdog timer for communication supervision . It also supports forced output modes for troubleshooting purposes .
Physical and Electrical Specifications
The module weighs 0.3 kilograms and fits standard NP1 module dimensions . It operates on a 24 V DC supply with 150 mA current draw . The Fuji NP1L-TL1 uses a 9-pin D-sub connector for network cabling . Its IP20 protection suits indoor control cabinet installation .
Environmental and Operating Conditions
This communication module functions reliably from 0 to 55 °C ambient temperature . It stores between -25 and 70 °C during idle periods . The Fuji NP1L-TL1 meets standard industrial EMC and vibration standards . Its design ensures long-term stability in factory environments .
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | NP1L-TL1 |
| Product Type | Device Level Communication Module |
| Transfer Rate | 187.5 kbps |
| Max I/O Points | 64 (digital) |
| Max Slaves | 31 |
| Network Protocol | Device-level fieldbus |
| Cable Type | Shielded twisted-pair |
| Operating Voltage | 24 V DC |
| Current Consumption | 150 mA |
| Weight | 0.3 kg |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 70 °C |
| Protection | IP20 |
Details
| Weight | 0.35 kg |
|---|---|
| Dimensions | 52 × 120 × 85 mm |
Reviews
There are no reviews yet.