Power Distribution for AC2000 and EX2000 Drives
The GE DS200TCPDG2B DS200TCPDG2BEC distributes DC power to multiple drive components. This board receives input from the main power supply and routes it safely. It feeds control boards, gate drivers, and cooling fans.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | DS200TCPDG2B DS200TCPDG2BEC |
| Category | Distribution Board |
| Height | 250 mm |
| Width | 150 mm |
| Depth | 30 mm |
| Weight | 0.550 kg |
| Input Voltage | 300 V DC (from DC bus) |
| Output Rails | +24 V DC, +15 V DC, +5 V DC |
| Total Output Power | 150 W maximum |
| Number of Output Ports | 8 x fused outputs |
| Fuse Ratings | 1 A, 2 A, 5 A, 10 A (mix) |
| Connector Type | 1 x 20-pin input, 8 x 6-pin output headers |
| Bus Bar Type | Copper (plated) |
| Current Rating | 30 A input bus bar |
| Voltage Drop | <0.5 V at full load |
| Status Indicators | 8 x red LEDs (fuse blown indication) |
| Internal Components | 1 PCB, 8 fuse holders, 1 bus bar, 8 LEDs, 2 capacitors |
| Energy Storage | 2200 µF bus filtering capacitor |
Distribution Architecture and Output Rails
The GE DS200TCPDG2B DS200TCPDG2BEC receives 300 V DC from the drive’s DC bus. Three regulated output rails provide +24 V DC, +15 V DC, and +5 V DC. A copper bus bar carries input current up to 30 amperes. The board distributes power through eight individually fused output ports. Each port delivers power to a specific drive component. The GE DS200TCPDG2B DS200TCPDG2BEC supports a total output power of 150 watts.
Fuse Configuration and Protection
This distribution board uses color-coded fuses for easy identification. Each output port has its own fuse rated for the connected load. Fuse ratings include 1 A, 2 A, 5 A, and 10 A options. A red LED lights up next to any blown fuse immediately. The DS200TCPDG2B DS200TCPDG2BEC allows individual fuse replacement without board removal. Voltage drop across the bus bar measures less than 0.5 volts at full load.
Component Power Allocation
The GE DS200TCPDG2B DS200TCPDG2BEC supplies +5 V DC to control logic boards. It provides +15 V DC to gate driver circuits and analog components. The +24 V DC rail powers contactor drivers and cooling fans. Each output port has a dedicated connector for easy cable attachment. The board routes power to the main control board first. It then supplies secondary boards in a controlled sequence.
Physical Dimensions and Installation Guidelines
The GE DS200TCPDG2B DS200TCPDG2BEC weighs 0.550 kilograms for secure mounting. Its height measures 250mm, width 150mm, and depth 30mm. Install this board between the power supply and other drive boards. The board consumes no power itself beyond minimal losses. It operates reliably from 0°C to +50°C ambient temperature. Use proper ESD handling procedures during installation.
Energy Storage and Filtering Capacitance
The DS200TCPDG2B DS200TCPDG2BEC includes a 2200 µF capacitor for bus filtering. This capacitor stabilizes the DC bus voltage during load changes. It also reduces switching noise from other drive components. The capacitor discharges within 45 seconds after removing input power. Wait one minute before servicing the GE DS200TCPDG2B DS200TCPDG2BEC for safety. No battery is present on this distribution board.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.