This IOS plus power connect board manages I/O signals and DC power distribution in Mark V systems. It links field I/O modules with the main turbine controller. You will find this board in GE Mark V cabinets for steam and gas turbines.
Key Technical Specifications
| Parameter | Details |
|---|---|
| Model Numbers | DS200DPCAG1A DS200DPCAG1ADC |
| Brand | GE (General Electric) |
| Category | IOS + Power Connect Board |
| Dimensions (W x H x D) | 280 mm x 190 mm x 35 mm |
| Weight | 1.1 kg |
| Power Rails | 5V DC (12A), 12V DC (3A), 24V DC (6A) |
| Onboard Energy Storage | 8 x 680 µF capacitors (5440 µF total) |
| Component Count | 196 discrete components |
| I/O Interface | 6 x 50-pin ribbon connectors |
| Power Input | 24V DC from external supply |
| Signal Isolation | Optocoupler (2500V) on digital lines |
| Protection | Overcurrent, overvoltage, thermal |
| Status Indicators | 6 LEDs (3 power, 3 fault) |
| Operating Temperature | 0°C to 60°C |
Physical Layout and Rack Mounting
This power connect board measures 280 mm in width and 190 mm in height. Its depth reaches 35 mm for standard Mark V racks. The unit weighs 1.1 kilograms for straightforward backplane installation. Two edge connectors plug directly into the rack for power and signal routing.
Internal Circuitry and Energy Storage
One hundred ninety-six components populate this multi-layer power and I/O board. Eight 680 µF capacitors form a 5440 µF total energy storage bank. This bank decouples three separate voltage rails for clean power delivery. Consequently, connected I/O modules receive stable voltage during peak current demands. Multiple ground planes minimize noise coupling between analog and digital sections.
Power Distribution and Rail Capacity
The board supplies 5V DC at 12 amps for logic and communication circuits. It also provides 12V DC at 3 amps for analog interface modules. A 24V rail at 6 amps powers field I/O devices and relays. Each rail includes independent overcurrent protection with automatic recovery. Green LEDs confirm the presence of each voltage rail.
I/O Signal Routing and Isolation
Six 50-pin ribbon connectors distribute I/O signals between the controller and field modules. The board routes digital inputs and outputs through optocoupler isolation. A 2500V isolation barrier protects the backplane from field wiring surges. Red LEDs trigger when the board detects a signal fault or missing voltage. This design simplifies field wiring and improves system reliability.
Compatibility Note
Both DS200DPCAG1A DS200DPCAG1ADC share identical electrical and mechanical specifications. The ADC suffix indicates a later hardware revision with enhanced thermal management. You can use either version interchangeably in any Mark V I/O rack.
Details
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 108 × 127 mm |
Reviews
There are no reviews yet.