The IIDOP05A communication port module from ABB Bailey handles data exchange within INFI 90 and Net 90 control networks. Plant engineers rely on this module when controllers must link with operator interfaces and supervisory systems. Consequently, it keeps process data moving reliably across the plant floor.
Key Technical Specifications
The table below summarizes the main physical and electrical parameters of the IIDOP05A module.
| Parameter | Specification |
|---|---|
| Product Type | Communication Port Module |
| Compatibility | ABB Bailey INFI 90 / Net 90 systems |
| Dimensions | Approximately 178 mm x 102 mm x 25 mm |
| Weight | Approximately 0.25 kg (0.55 lbs) |
| Mounting | Standard INFI 90 module rack slot |
| Interface | Backplane bus and serial communication ports |
| Connectors | Multi-pin edge connector and D-sub ports |
| Component Count | Multiple communication controllers and driver circuits |
| Energy Storage | On-board capacitors for buffer retention |
| Port Count | Multiple independent serial communication ports |
| Operating Temperature | 0 degrees C to 60 degrees C |
| Storage Temperature | -40 degrees C to 85 degrees C |
| Humidity | 5% to 95% non-condensing |
Functional Overview
This module manages protocol conversion and message routing between the processor and external devices. Therefore, it frees the main processor from routine communication overhead. The IIDOP05A supports configurable baud rates and data formats for flexible integration. Meanwhile, its onboard energy storage protects data buffers during brief power interruptions.
Installation and Handling Notes
Always confirm protocol settings before inserting the IIDOP05A into an active rack. In addition, check that cable pinouts match your device requirements. Secure the retaining screws evenly to avoid connector stress. Finally, document all port assignments for future troubleshooting.
Details
| Weight | 0.35 kg |
|---|---|
| Dimensions | 90 × 45 × 100 mm |
